Cobra Touch Key

Immobiliser Programming instructions

8510 (Touch Key: 937)

1. Turn the ignition ON and OFF 3 times, then ON within 7 seconds

2. The LED will illuminate permanently

3. Touch a working touch key onto the receptacle, the LED will extinguish for 1 second

4. Repeat step 3 for the additional keys you want to add

5. Switch the ignition OFF to exit programming

Note: A maximum of 4 touch keys can be stored on the system. Adding keys will erase all existing keys

0802T (Touch Key: 937)
1. Disarm the immobiliser using a working touch key (LED extinguished)
2. Turn the immobiliser switch ‘1’ to the ON position (the LED will illuminate)
3. Touch a new key into the mini-socket for approx 1 second, the LED will flash
4. Repeat step 3 for all the existing touch key
5. Turn the immobiliser switch ‘1’ to the OFF position (the LED will extinguish)
6. Test both keys.

Note: A maximum of 2 keys can be stored on this system. Adding a key will erase the existing key.