Tag Archives: how to install parking sensors

How To Install Rear Parking Sensors

go here Lots of people would like parking sensors but don’t feel confident with installing them. Once an overview of the procedure has been established then realistically anyone can do it. Here we’ve put together a guide to help you with the installation process.

get link

http://1conn.com/instagram-neden-bagimlilik-yaratiyor/ follow site Mark the Holes

click

اخترق الفوركس The first thing to do is to mark the holes out onto the rear bumper establishing where the sensors will go. It is recommended that you use masking tape to ensure a visible mark and to limit the likelihood of the drill slipping.

http://www.ac-brno.org/?pycka=%D8%AD%D8%B3%D8%A7%D8%A8-%D9%81%D9%88%D8%B1%D9%83%D8%B3-%D8%AA%D8%AC%D8%B1%D9%8A%D8%A8%D9%8A&562=ad

http://www.livingwithdragons.com/?printers=%D8%AA%D8%AF%D8%A7%D9%88%D9%84-%D8%A7%D9%84%D8%A3%D8%B3%D9%87%D9%85-%D8%A7%D9%84%D8%B3%D8%B9%D9%88%D8%AF%D9%8A%D8%A9&e7d=1e Find the centre of the vehicle and work from here. The spacing between each sensor should be between 30-40cm. Ensure that the spacings are the same for all the sensors. This not only makes for a professional aesthetically pleasing job but also ensures that the sensors will work correctly. It is worth spending time planning this stage.

go to site

click Also note the height from the floor must be between 50-80cm with the ideal height being 55cm.

click here

بيع اسهم بنك الانماء When making your hole cuts ensure the drill is held at a 90 degree angle otherwise the sensors will not sit right. This will effect their efficiency.

go site

http://asandoc.com/?dwonsnow3=%D8%A7%D9%84%D8%AE%D9%8A%D8%A7%D8%B1%D8%A7%D8%AA-%D8%A7%D9%84%D8%AB%D9%86%D8%A7%D8%A6%D9%8A%D8%A9-%D8%B9%D9%84%D9%89-%D8%A7%D9%84%D8%B5%D8%B9%D9%8A%D8%AF-%D8%A7%D9%84%D8%AF%D9%88%D9%84%D9%8A&03a=05 Be sure to use the correct size drill bit – some kits come with the bit supplied. For others you will need to buy the bit separately.

استراتيجية احتمال الخيارات الثنائية
Parking Sensors Installation Guide - marking the holes
Parking Sensors Installation Guide

http://theiu.org/?alisa=%D8%A7%D9%81%D8%B6%D9%84-%D9%85%D9%88%D8%A7%D9%82%D8%B9-%D8%AA%D8%AF%D8%A7%D9%88%D9%84-%D8%A7%D9%84%D8%AE%D9%8A%D8%A7%D8%B1%D8%A7%D8%AA-%D8%A7%D9%84%D8%AB%D9%86%D8%A7%D8%A6%D9%8A%D8%A9&76a=c0 http://dinoprojektet.se/?kapitanse=jobb-hemifr%C3%A5n-finska&0de=94 Power Supply

عرض جميع اسعار الاسهم السعودية

http://wilsonrelocation.com/?q=forx The control unit has an input for the power lead which is red (positive) and black (negative). The red goes to the reverse light circuit which can be found by consulting your car’s guide book or by using a multimeter. Another possible way is to search the internet on forums about your vehicle, however if you do this it is advisable to double check using a multimeter.

click here
Main unit and wiring power supply
Main unit and wiring power supply

الخيارات الثنائية الاستراتيجية الأساسية Once the reverse light’s wire has been located strip it and connect the red wire and solder it an tape the joint with electrical tape. The black wire should then be grounded.

موقع شراء الاسهم

click here Here is an example

افضل موقع فوركس
Example of wiring
Example of wiring

اخبار الاسهم اليوم http://theshopsonelpaseo.com/?syzen=%D9%83%D9%85-%D9%82%D9%8A%D9%85%D8%A9-%D8%A7%D9%84%D8%B3%D9%87%D9%85-%D8%B9%D9%86%D8%AF-%D8%A7%D9%84%D8%A7%D9%83%D8%AA%D8%AA%D8%A7%D8%A8-%D9%81%D9%8A-%D8%B3%D9%87%D9%85-%D8%A7%D9%85-%D8%A7%D9%84%D9%82%D8%B1%D9%89&d6c=f5 Connecting the Sensors

خيار ثنائي نيوزيلندا

source Feed each sensor’s wire through the drilled hole and through a suitable grommet hole. Each sensor should be put in the correct input slot in the control unit.

افضل موقع فوركس

http://theshopsonelpaseo.com/?syzen=%D9%85%D9%86%D8%AA%D8%AF%D9%89-%D8%AA%D8%AF%D8%A7%D9%88%D9%84%D8%A7%D8%AA-%D8%A7%D9%84%D8%A7%D8%B3%D9%87%D9%85-%D8%A7%D9%84%D8%B3%D8%B9%D9%88%D8%AF%D9%8A%D9%87&046=2d منتدى تداولات الاسهم السعوديه source link Connect the LED display

go Find a suitable place on your dashboard or where you would like your LED display. Run the wire to the control unit. Taking care  to make sure the wire is not visible ensure a more professional looking finish

follow link