Tag Archives: guide to installing parking sensors

How To Install Rear Parking Sensors

follow link Lots of people would like parking sensors but don’t feel confident with installing them. Once an overview of the procedure has been established then realistically anyone can do it. Here we’ve put together a guide to help you with the installation process.

see

source site follow site Mark the Holes

http://whitegoldimages.co.uk/?kowtovnosti=%D8%AA%D8%AF%D8%A7%D9%88%D9%84-%D8%A7%D9%84%D8%A7%D8%B3%D9%87%D9%85-%D9%81%D9%8A-%D8%A7%D9%84%D8%A7%D9%85%D8%A7%D8%B1%D8%A7%D8%AA&d8d=ae

go here The first thing to do is to mark the holes out onto the rear bumper establishing where the sensors will go. It is recommended that you use masking tape to ensure a visible mark and to limit the likelihood of the drill slipping.

enter

watch Find the centre of the vehicle and work from here. The spacing between each sensor should be between 30-40cm. Ensure that the spacings are the same for all the sensors. This not only makes for a professional aesthetically pleasing job but also ensures that the sensors will work correctly. It is worth spending time planning this stage.

مؤشر قناة خيار ثنائي

source Also note the height from the floor must be between 50-80cm with the ideal height being 55cm.

اغلاق الاسهم السعودية

here When making your hole cuts ensure the drill is held at a 90 degree angle otherwise the sensors will not sit right. This will effect their efficiency.

أفضل إشارات الخيارات الثنائية عام 2017

here Be sure to use the correct size drill bit – some kits come with the bit supplied. For others you will need to buy the bit separately.

دليل شركات الفوركس
Parking Sensors Installation Guide - marking the holes
Parking Sensors Installation Guide

كم سعر اونصة الذهب بالريال السعودي خيار ثنائي قانونيا فينا Power Supply

كيف تربح المال بسهولة على الإنترنت

http://investingtips360.com/?klaystrofobiya=%D8%A7%D8%B3%D8%B9%D8%A7%D8%B1-%D8%A7%D8%B3%D9%87%D9%85-%D8%B3%D8%A7%D8%A8%D9%83-%D8%A7%D9%84%D9%8A%D9%88%D9%85&4f7=d1 The control unit has an input for the power lead which is red (positive) and black (negative). The red goes to the reverse light circuit which can be found by consulting your car’s guide book or by using a multimeter. Another possible way is to search the internet on forums about your vehicle, however if you do this it is advisable to double check using a multimeter.

الخيارات الثنائية الأعمال التجارية
Main unit and wiring power supply
Main unit and wiring power supply

http://www.livingwithdragons.com/?printers=%D8%AB%D9%86%D8%A7%D8%A6%D9%8A%D8%A9-%D8%A7%D9%84%D9%85%D8%AF%D8%B1%D8%B3%D8%A9-%D8%AA%D8%AF%D8%A7%D9%88%D9%84-%D8%A7%D9%84%D8%AE%D9%8A%D8%A7%D8%B1%D8%A7%D8%AA&339=89 Once the reverse light’s wire has been located strip it and connect the red wire and solder it an tape the joint with electrical tape. The black wire should then be grounded.

get link

http://parts.powercut.co.uk/?risep=%D8%A3%D9%81%D8%B6%D9%84-%D8%A7%D9%84%D8%AE%D9%8A%D8%A7%D8%B1%D8%A7%D8%AA-%D8%A7%D9%84%D8%AB%D9%86%D8%A7%D8%A6%D9%8A%D8%A9-%D8%A7%D9%84%D8%B4%D8%B9%D8%A8%D9%8A-%D8%A7%D8%B3%D8%AA%D8%B1%D8%A7%D8%AA%D9%8A%D8%AC%D9%8A%D8%A9&033=af Here is an example

go here
Example of wiring
Example of wiring

http://theshopsonelpaseo.com/?syzen=%D8%B3%D9%88%D9%82-%D9%82%D8%B7%D8%B1-%D9%84%D9%84%D8%A7%D8%B3%D9%87%D9%85&15a=09 صناديق الاستثمار في بنك الفرنسي الأسهم المح Connecting the Sensors

follow

source Feed each sensor’s wire through the drilled hole and through a suitable grommet hole. Each sensor should be put in the correct input slot in the control unit.

خيار ثنائي المراجعة اليومية

http://investingtips360.com/?klaystrofobiya=%D9%85%D8%AA%D9%8A-%D8%A7%D9%84%D8%AE%D8%B7%D9%88%D8%B7-%D8%A7%D9%84%D8%B3%D8%B9%D9%88%D8%AF%D9%8A%D8%A9-%D9%84%D8%B4%D8%AD%D9%86-%D8%AA%D8%B7%D8%B1%D8%AD-%D8%A7%D8%B3%D9%87%D9%85%D9%87%D8%A7&b82=78 متي الخطوط السعودية لشحن تطرح اسهمها http://gl5.org/?prikolno=%D8%A7%D9%84%D8%AE%D9%8A%D8%A7%D8%B1%D8%A7%D8%AA-%D8%A7%D9%84%D8%AB%D9%86%D8%A7%D8%A6%D9%8A%D8%A9-%D8%A7%D9%84%D9%85%D9%88%D8%A7%D9%82%D8%B9-%D9%81%D9%8A-%D8%A7%D9%84%D9%85%D9%85%D9%84%D9%83%D8%A9-%D8%A7%D9%84%D9%85%D8%AA%D8%AD%D8%AF%D8%A9&1d1=65 Connect the LED display

كيف تكسب المال من خلال الانترنت Find a suitable place on your dashboard or where you would like your LED display. Run the wire to the control unit. Taking care  to make sure the wire is not visible ensure a more professional looking finish

http://dinoprojektet.se/?kapitanse=jobba-hemifr%C3%A5n-gratis&7fa=93